4-20 mA to CAN bus, with Wi-Fi

Article number PR505x510

PR505 module in narrow DIN rail enclosure: SW1, SW2 and SW3 buttons, LEDs and numbered screw terminals

The PR505x510 measures a 4-20 mA signal, for example from a pressure or level sensor, and sends the value periodically as a message on a CAN bus. This lets you add an analogue sensor to a machine or vehicle with a CAN network. The message ID, the send interval and the scaling are set through the Wi-Fi hotspot.

Price on request. Supplied in series, from 10 units per item. Not in stock? Then we build your series. One or a few units only as a trial, for a company with a series in sight.

Specifications

Supply	12 and 24 V DC, operating range 11 to 30 V DC
Input	4-20 mA
Output	CAN bus; value as a message with adjustable ID and send interval
Isolation	Not galvanically isolated, the CAN bus included
Setup	Through the built-in Wi-Fi hotspot, with a phone, tablet or laptop; buttons SW1 to SW3 on the module
Communication	Message ID, send interval and scaling adjustable
Wi-Fi	Built-in hotspot for setup and software updates
Mounting	DIN rail, narrow upright enclosure
Internally fitted with	PR181s14

Setup

Connect the supply, the 4-20 mA source and the CAN bus (CAN L and CAN H) according to the wiring diagram supplied with the module.
Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to the Wi-Fi hotspot.
Set the baud rate, message ID, send interval and scaling and store the settings.