Four analogue inputs and relay via Modbus TCP (Ethernet), with OLED display

Article number PR515x532

PR515 module in DIN rail enclosure, angled top view: OLED display, network connector, relay and screw terminals

The PR515x532 connects to an Ethernet network with a network cable. Through Modbus TCP, a PLC, SCADA system or computer reads the values of four analogue inputs and switches a relay. Each input is 0-10 V or 4-20 mA, chosen when ordering. The IP address and other network settings are made on the OLED display.

Price on request. Supplied in series, from 10 units per item. Not in stock? Then we build your series. One or a few units only as a trial, for a company with a series in sight.

Specifications

Supply	12 and 24 V DC, operating range 11 to 30 V DC
Input	Four analogue inputs, 0-10 V or 4-20 mA per input (chosen when ordering)
Output	Modbus TCP over Ethernet (RJ45); relay contact (normally open)
Isolation	Analogue inputs not galvanically isolated
Setup	OLED display with UP, DOWN and OK buttons
Communication	IP address and network settings adjustable on the display
USB	USB-C for software updates and reading the status
Wi-Fi	Built-in hotspot for software updates
Mounting	DIN rail, horizontal enclosure
Internally fitted with	PR181T24

Setup

Connect the supply, the analogue signals, the relay and the network cable according to the wiring diagram supplied with the module.
On the display, set the IP address and other network settings.
Store with SAVE and read the inputs with your PLC or SCADA system; the register list is supplied with the module.