Datasheet PR515x554

Signal converters and isolating amplifiers

Issued 3 November 2026

Pulse contact (up and down) to 0-10 V, with OLED display

Article number PR515x554

PR515 module board from above: OLED display, UP, OK and DWN buttons, relay, USB-C port and terminals 1 to 22

The PR515x554 has two isolated inputs for push buttons or pulse contacts: one raises the output, the other lowers it. A short press gives a small step, holding the button lets the output rise or fall evenly. Step size, speed and the minimum and maximum of the 0-10 V output are set on the OLED display, which also shows the current value.

Price on request. Supplied in series, from 10 units per item. Not in stock? Then we build your series. One or a few units only as a trial, for a company with a series in sight.

Specifications

Supply12 and 24 V DC, operating range 11 to 30 V DC
InputTwo inputs for push buttons or pulse contacts (up and down), galvanically isolated
Output0-10 V; minimum and maximum adjustable
IsolationInputs galvanically isolated with optocouplers; output not isolated
SetupOLED display with UP, DOWN and OK buttons
Rise and fall rateStep size and speed adjustable
USBUSB-C for software updates and reading the status
Wi-FiBuilt-in hotspot for software updates
MountingDIN rail, horizontal enclosure
Internally fitted withPR181s04

Setup

  1. Connect the supply, the two push buttons or contacts and the output according to the wiring diagram supplied with the module.
  2. On the display, set the minimum and maximum of the output.
  3. Set the step size and the speed and store with SAVE.