Datasheet W181A-P506

I/O modules and communication

Issued 19 November 2026

Two resistance inputs (tank sender) read out via Wi-Fi, with OLED display

Article number W181A-P506

W181 module in compact DIN rail enclosure, front three-quarter view: OLED display, three push buttons, DIP switch, USB-C port and screw terminals

The W181A-P506 measures two resistances without range switching, from 0-200 Ω (tank senders) up to 100 kΩ. The measurement is ratiometric against a 0.1 % reference resistor with a 16-bit ADC; the measuring current is only on while measuring. The values are shown on the OLED display and are sent via Wi-Fi using MQTT to a server of your choice.

Price on request. Supplied in series, from 10 units per item. Not in stock? Then we build your series. One or a few units only as a trial, for a company with a series in sight.

Specifications

Supply24 V DC (±15 %)
InputTwo resistance inputs, 0 Ω to 100 kΩ
OutputWi-Fi with MQTT to a server of your choice
IsolationNot galvanically isolated; senders connected to the module's 0 V
SetupOLED display with UP, DOWN and OK buttons; DIP switch for basic choices
AccuracyApprox. 0.15 % at 0-200 Ω and 0-500 Ω; resolution approx. 0.02 Ω at 0-200 Ω
USBUSB-C for software updates and reading the status
Wi-FiBuilt-in hotspot for software updates
MountingDIN rail, compact enclosure

Connections

Terminal 3Resistance 1
Terminal 40 V (common)
Terminal 5Resistance 2

Setup

  1. Connect the supply and the two senders according to the wiring diagram supplied with the module.
  2. Set the resistance at empty and full and the unit per channel on the display.
  3. Switch on the Wi-Fi hotspot on the display and enter your Wi-Fi network and the MQTT server details.