Not quite right?
A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.
Resistance to 0-10 V, with OLED display
Article number PR515x556
The PR515x556 measures a resistance and passes it on as 0-10 V. This lets you connect a resistance sensor, such as a tank float, an NTC or an old gauge sender, to a PLC or controller with a 0-10 V input. The resistance at 0 V and at 10 V is taught on the OLED display, also reversed, so the output matches any sender.
- Supply 12 and 24 V DC, operating range 11 to 30 V DC
- Input resistance, for example a tank float or NTC
- Output 0-10 V; start and end taught, also reversed
Price on request
Supplied in series, from 10 units per item. Not in stock? Then we build your series.
One or a few units only as a trial, for a company with a series in sight.
Orders are placed by email with a purchase order. We supply businesses only.
Specifications
| Supply | 12 and 24 V DC, operating range 11 to 30 V DC |
|---|---|
| Input | Resistance, for example a tank float or NTC |
| Output | 0-10 V; start and end taught, also reversed |
| Isolation | Not galvanically isolated |
| Setup | OLED display with UP, DOWN and OK buttons |
| USB | USB-C for software updates and reading the status |
| Wi-Fi | Built-in hotspot for software updates |
| Mounting | DIN rail, horizontal enclosure |
| Internally fitted with | PR181T55 |
Setup
- Connect the supply, the resistance sensor and the output according to the wiring diagram supplied with the module.
- Bring the sender to its lowest position and teach it on the display as 0 V; do the same in the highest position for 10 V.
- Check the output on the display and store with SAVE.
Application
- Connecting a tank float with resistance output to a PLC
- Converting an NTC temperature sender to 0-10 V
- Reusing the sender of an old gauge with a new control system
PR515 series: controllers and converters with OLED display
The modules in the PR515 series have an OLED display and push buttons, so they can be set up without a computer and show the current values of inputs and outputs. They run on 12 and 24 V DC systems. Most versions can be extended on request, for example with an extra relay output, a PWM output, a bus connection (CAN bus or Modbus) or a different sensor input.
Question about wiring?
You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.
PR515x556
Request price and lead time
Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.
The fastest way
Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.
WhatsApp Willem(opens in a new tab)Request
Potentiometers
Related modules
PR181-X039
30-240 Ω resistance to 4-20 mA signal conditioner, isolated, with display
In: ResistanceOut: 4-20 mA or 0-20 mA
PR181-X038
30-240 kΩ resistance to 4-20 mA signal conditioner, isolated, with display
In: ResistanceOut: 4-20 mA or 0-20 mA
PR515x604
Resistance to relay (level, NTC), adjustable limit, with OLED display
In: ResistanceOut: Relay
AV251228A1
16 resistance inputs to Modbus RTU (RS485), with line monitoring
In: ResistanceOut: Modbus