Control panel with buttons and display

For machine and equipment builders

Electronics for industrial automation

Signal converters, I/O, drivers and monitoring that fit your PLC and your machine. Our own design, in series from 10 units.

Electronics for industrial automation

Signal converters

We convert 4-20 mA, 0-10 V, 0-5 V, ±10 V, PWM, pulses, current or temperature (PT100, thermocouple) into the signal your PLC or instrument expects, galvanically isolated if required. We also turn a potentiometer or joystick into a 4-20 mA or 0-10 V signal.

ProCircuits I/O boards with coloured connectors

All signal converters

From 0-10 V to 4-20 mA, from PT100 to 0-10 V, galvanically isolated or not: view our signal converters, each with a datasheet.

Modbus module on a DIN rail

Electronics for industrial automation

I/O and communication

Our I/O modules read up to 16 voltages, resistances or contacts via Modbus RS485 and switch relays via CAN bus. In custom designs we connect your board via CAN, LIN, RS485, USB, Ethernet or wifi to the rest of the machine, to a PLC or to a display.

Electronics for industrial automation

Valves, motors and pumps

We drive hydraulic valves, motors and pumps with PWM from 0-10 V, ±10 V, a joystick or a switch contact, with adjustable ramp-up and ramp-down where needed. A PID controller keeps a process at a setpoint, or a position at a joystick position.

Prototype with LCD and touch buttons behind thick glass, with DIN rail modules behind it
ProCircuits online dashboard with live measured values and graphs

Electronics for industrial automation

Monitoring without modification

May a machine not be modified, for example because it is certified? An adapter between the machine and the wall socket measures the power consumption and derives from it what the machine is doing. You see it online and receive an alert if something deviates, for a fixed amount per device per month.

Electronics for industrial automation

Remaking an old board

Is a board in your installation no longer available, or has the supplier stopped? We remake it with the same function and connections, using components that will be available for years again. After that we supply it in series for as long as you need it.

Repair and analysis of an old circuit board
Technicians at work in a production hall

Need advice on your electronics?

Call or message Willem, or plan a free Quickscan. You speak directly with the developer.

Get in touch, without obligation

Contact