Not quite right?
A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.
Four analogue inputs and relay via Modbus TCP (Ethernet), with OLED display
Article number PR515x532
The PR515x532 connects to an Ethernet network with a network cable. Through Modbus TCP, a PLC, SCADA system or computer reads the values of four analogue inputs and switches a relay. Each input is 0-10 V or 4-20 mA, chosen when ordering. The IP address and other network settings are made on the OLED display.
- Supply 12 and 24 V DC, operating range 11 to 30 V DC
- Input four analogue inputs, 0-10 V or 4-20 mA per input (chosen when ordering)
- Output modbus TCP over Ethernet (RJ45); relay contact (normally open)
Price on request
Supplied in series, from 10 units per item. Not in stock? Then we build your series.
One or a few units only as a trial, for a company with a series in sight.
Orders are placed by email with a purchase order. We supply businesses only.
Specifications
| Supply | 12 and 24 V DC, operating range 11 to 30 V DC |
|---|---|
| Input | Four analogue inputs, 0-10 V or 4-20 mA per input (chosen when ordering) |
| Output | Modbus TCP over Ethernet (RJ45); relay contact (normally open) |
| Isolation | Analogue inputs not galvanically isolated |
| Setup | OLED display with UP, DOWN and OK buttons |
| Communication | IP address and network settings adjustable on the display |
| USB | USB-C for software updates and reading the status |
| Wi-Fi | Built-in hotspot for software updates |
| Mounting | DIN rail, horizontal enclosure |
| Internally fitted with | PR181T24 |
Setup
- Connect the supply, the analogue signals, the relay and the network cable according to the wiring diagram supplied with the module.
- On the display, set the IP address and other network settings.
- Store with SAVE and read the inputs with your PLC or SCADA system; the register list is supplied with the module.
Application
- Reading analogue sensors remotely over an existing company network
- Including measurements in a SCADA system without an extra I/O card
- Switching a load or alarm from a network
PR515 series: controllers and converters with OLED display
The modules in the PR515 series have an OLED display and push buttons, so they can be set up without a computer and show the current values of inputs and outputs. They run on 12 and 24 V DC systems. Most versions can be extended on request, for example with an extra relay output, a PWM output, a bus connection (CAN bus or Modbus) or a different sensor input.
Question about wiring?
You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.
PR515x532
Request price and lead time
Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.
The fastest way
Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.
WhatsApp Willem(opens in a new tab)Request
I/O modules
Related modules
PR515x533
Modbus TCP (Ethernet) to 0-10 V and 4-20 mA, with OLED display
In: Modbus TCP (Ethernet)Out: 0-10 V or 4-20 mA
PR515x540
Four analogue inputs and relay via Wi-Fi to your dashboard (MQTT), with OLED display
In: 0-10 V or 4-20 mAOut: Wi-Fi or Relay
PR131s01
16 analogue or digital inputs to Modbus RTU (RS485)
In: 0-10 V, 4-20 mA, Resistance, Potentiometer or DigitalOut: Modbus
16-kanaals-spanningsmeting-Modbus
16 voltage inputs to Modbus RTU (RS485)
In: 0-5 V, 0-10 V or DigitalOut: Modbus