Not quite right?
A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.
0-10 V to eight PWM channels for LED groups, high-side switched, with Wi-Fi
Article number PR505x504
The PR505x504 has eight PWM outputs, high-side switched, that are controlled together by one 0-10 V signal. The minimum and maximum are set per channel, so groups with different LEDs still look the same, or a group switches on only above a certain level. The PWM frequency and dimming rate are set through the Wi-Fi hotspot.
- Supply 12 and 24 V DC, operating range 11 to 30 V DC
- Input 0-10 V DC
- Output eight PWM outputs, high-side switched
Price on request
Supplied in series, from 10 units per item. Not in stock? Then we build your series.
One or a few units only as a trial, for a company with a series in sight.
Orders are placed by email with a purchase order. We supply businesses only.
Specifications
| Supply | 12 and 24 V DC, operating range 11 to 30 V DC |
|---|---|
| Input | 0-10 V DC |
| Output | Eight PWM outputs, high-side switched |
| Isolation | Not galvanically isolated |
| Setup | Through the built-in Wi-Fi hotspot, with a phone, tablet or laptop; buttons SW1 to SW3 on the module |
| PWM frequency | Adjustable |
| Rise and fall rate | Minimum, maximum and dimming rate adjustable per channel |
| Wi-Fi | Built-in hotspot for setup and software updates |
| Mounting | DIN rail, narrow upright enclosure |
| Internally fitted with | PR181T35 |
Setup
- Connect the supply, the 0-10 V source and the LED groups according to the wiring diagram supplied with the module.
- Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to the Wi-Fi hotspot.
- Set the minimum and maximum per channel, and the PWM frequency and store the settings.
Application
- Dimming eight groups of LED lighting in a room, greenhouse or ship together
- Matching LED strips with different brightness
- Switching lighting on in stages with a rising 0-10 V signal
PR505 series: converters with Wi-Fi
The PR505 modules have a built-in Wi-Fi hotspot. Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to change settings or load new firmware. The modules run on 12 and 24 V DC.
Question about wiring?
You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.
PR505x504
Request price and lead time
Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.
The fastest way
Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.
WhatsApp Willem(opens in a new tab)Request
Dimmers
Related modules
PR804s06
0-10 V LED dimmer, high-side switched, adjustable limits and dimming speed
In: 0-10 VOut: PWM
PR507 · PR517
Dimmer for two or five Nirolo/Olorin displays with potentiometer control, isolated outputs
In: PotentiometerOut: Potentiometer
PR505x109
0-10 V to PWM driver for valves, lamps and motors, with Wi-Fi
In: 0-10 VOut: PWM
PR515x551
0-5 V to PWM, high-side or low-side switched, with OLED display
In: 0-5 VOut: PWM