Not quite right?
A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.
Pulse contact (up and down) to 0-10 V, with OLED display
Article number PR515x554
The PR515x554 has two isolated inputs for push buttons or pulse contacts: one raises the output, the other lowers it. A short press gives a small step, holding the button lets the output rise or fall evenly. Step size, speed and the minimum and maximum of the 0-10 V output are set on the OLED display, which also shows the current value.
- Supply 12 and 24 V DC, operating range 11 to 30 V DC
- Input two inputs for push buttons or pulse contacts (up and down), galvanically isolated
- Output 0-10 V; minimum and maximum adjustable
Price on request
Supplied in series, from 10 units per item. Not in stock? Then we build your series.
One or a few units only as a trial, for a company with a series in sight.
Orders are placed by email with a purchase order. We supply businesses only.
Specifications
| Supply | 12 and 24 V DC, operating range 11 to 30 V DC |
|---|---|
| Input | Two inputs for push buttons or pulse contacts (up and down), galvanically isolated |
| Output | 0-10 V; minimum and maximum adjustable |
| Isolation | Inputs galvanically isolated with optocouplers; output not isolated |
| Setup | OLED display with UP, DOWN and OK buttons |
| Rise and fall rate | Step size and speed adjustable |
| USB | USB-C for software updates and reading the status |
| Wi-Fi | Built-in hotspot for software updates |
| Mounting | DIN rail, horizontal enclosure |
| Internally fitted with | PR181s04 |
Setup
- Connect the supply, the two push buttons or contacts and the output according to the wiring diagram supplied with the module.
- On the display, set the minimum and maximum of the output.
- Set the step size and the speed and store with SAVE.
Application
- Operating a speed or set point with two buttons on a panel
- Operating a 0-10 V controller from two PLC outputs
- Replacing a potentiometer with two push buttons
PR515 series: controllers and converters with OLED display
The modules in the PR515 series have an OLED display and push buttons, so they can be set up without a computer and show the current values of inputs and outputs. They run on 12 and 24 V DC systems. Most versions can be extended on request, for example with an extra relay output, a PWM output, a bus connection (CAN bus or Modbus) or a different sensor input.
Question about wiring?
You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.
PR515x554
Request price and lead time
Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.
The fastest way
Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.
WhatsApp Willem(opens in a new tab)Request
Signal converters
Related modules
PR181-X027
Up/down pulse input to 4-20 mA signal conditioner, isolated, with display
In: Pulse contactOut: 4-20 mA or 0-20 mA
PR100s09
Pulse contact to 0-5 V converter, push-button setup
In: Pulse contactOut: 0-5 V
PR515x555
Frequency or pulses to 0-10 V and 4-20 mA, with OLED display
In: FrequencyOut: 0-10 V or 4-20 mA
PR192T04
8 push buttons on DIN rail
Out: Pulse contact