Not quite right?
A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.
0-10 V to H-bridge for a motor in both directions, galvanically isolated, with Wi-Fi
Article number PR505x502
The PR505x502 drives a DC motor in two directions through an H-bridge. As delivered, the motor stands still at 5 V, runs anticlockwise towards 0 V and clockwise towards 10 V, with a speed that follows the distance from the centre. A dead band around the centre can be set, as can the ramp-up and ramp-down rate. The motor output is galvanically isolated from the input; settings are made through the Wi-Fi hotspot.
- Supply 12 and 24 V DC, operating range 11 to 30 V DC
- Input 0-10 V DC; 5 V = standstill as delivered
- Output H-bridge for a DC motor, anticlockwise and clockwise, with PWM
Price on request
Supplied in series, from 10 units per item. Not in stock? Then we build your series.
One or a few units only as a trial, for a company with a series in sight.
Orders are placed by email with a purchase order. We supply businesses only.
Specifications
| Supply | 12 and 24 V DC, operating range 11 to 30 V DC |
|---|---|
| Input | 0-10 V DC; 5 V = standstill as delivered |
| Output | H-bridge for a DC motor, anticlockwise and clockwise, with PWM |
| Isolation | Motor output galvanically isolated from the input |
| Setup | Through the built-in Wi-Fi hotspot, with a phone, tablet or laptop; buttons SW1 to SW3 on the module |
| Rise and fall rate | Ramp-up, ramp-down and dead band around the centre adjustable |
| Wi-Fi | Built-in hotspot for setup and software updates |
| Mounting | DIN rail, narrow upright enclosure |
| Internally fitted with | PR181s15 |
Setup
- Connect the supply, the 0-10 V source and the motor according to the wiring diagram supplied with the module.
- Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to the Wi-Fi hotspot.
- Set the centre position, the dead band and the ramp and store the settings.
Application
- Operating a small motor, winch or adjuster in both directions with a joystick or PLC
- Opening and closing a valve or gate with a DC motor
- Starting and stopping a motor smoothly with the adjustable ramp
PR505 series: converters with Wi-Fi
The PR505 modules have a built-in Wi-Fi hotspot. Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to change settings or load new firmware. The modules run on 12 and 24 V DC.
Question about wiring?
You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.
PR505x502
Request price and lead time
Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.
The fastest way
Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.
WhatsApp Willem(opens in a new tab)Request
Valve drivers
Related modules
PR515x016
PID position controller for 4-20 mA joystick with encoder, two motor outputs
In: 4-20 mA or RS485Out: PWM
PR505x503
4-20 mA to stepper motor, position follows the signal, with Wi-Fi
In: 4-20 mAOut: Stepper motor
PR181-X052
0-10 V centre-position joystick to two PWM outputs, low-side switched, with display
In: Joystick or 0-10 VOut: PWM
PR159s25
±10 V to two PWM outputs, isolated input
In: ±10 VOut: PWM