Not quite right?
A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.
CAN bus to 0-10 V and 4-20 mA, with Wi-Fi
Article number PR505x511
The PR505x511 listens on a CAN bus for a set message and converts a value from it into a 0-10 V and a 4-20 mA output. This lets you drive an analogue device, such as a valve driver, meter or older controller, from a machine or vehicle with a CAN network. If the message stops arriving, the outputs go to an adjustable safe value. Message ID, position of the value in the message and scaling are set through the Wi-Fi hotspot.
- Supply 12 and 24 V DC, operating range 11 to 30 V DC
- Input CAN bus; value from a message with adjustable ID
- Output 0-10 V and 4-20 mA, simultaneously
Price on request
Supplied in series, from 10 units per item. Not in stock? Then we build your series.
One or a few units only as a trial, for a company with a series in sight.
Orders are placed by email with a purchase order. We supply businesses only.
Specifications
| Supply | 12 and 24 V DC, operating range 11 to 30 V DC |
|---|---|
| Input | CAN bus; value from a message with adjustable ID |
| Output | 0-10 V and 4-20 mA, simultaneously |
| Isolation | Not galvanically isolated |
| Setup | Through the built-in Wi-Fi hotspot, with a phone, tablet or laptop; buttons SW1 to SW3 on the module |
| Monitoring | Outputs go to an adjustable value if the message stops |
| Wi-Fi | Built-in hotspot for setup and software updates |
| Mounting | DIN rail, narrow upright enclosure |
| Internally fitted with | PR181s05 and PR181s07 |
Setup
- Connect the supply, the CAN bus (CAN L and CAN H) and the outputs according to the wiring diagram supplied with the module.
- Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to the Wi-Fi hotspot.
- Set the baud rate, message ID, position of the value and scaling and store the settings.
Application
- Driving an analogue meter or gauge with a value from the CAN bus
- Coupling a valve driver or controller with a 0-10 V input to a CAN network
- Passing a CAN signal on to a PLC with a 4-20 mA input
PR505 series: converters with Wi-Fi
The PR505 modules have a built-in Wi-Fi hotspot. Hold button SW1 for about ten seconds and connect a phone, tablet or laptop to change settings or load new firmware. The modules run on 12 and 24 V DC.
Question about wiring?
You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.
PR505x511
Request price and lead time
Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.
The fastest way
Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.
WhatsApp Willem(opens in a new tab)Request
I/O modules
