PR515 module in horizontal DIN rail enclosure, front view with pluggable screw terminals

LIN bus to 0-10 V and PWM, with OLED display

Article number PR515x531

The PR515x531 links a LIN bus to analogue equipment. The module reads a value from a set LIN message and passes it on as 0-10 V and as a PWM signal. LIN is widely used in vehicles for components such as pumps, fans, valves and sensors. Message ID, position of the value and scaling are set on the OLED display.

Supply 12 and 24 V DC, operating range 11 to 30 V DC
Input LIN bus; value from a message with adjustable ID
Output 0-10 V and PWM, simultaneously

Price on request

Supplied in series, from 10 units per item. Not in stock? Then we build your series.

One or a few units only as a trial, for a company with a series in sight.

Request price and lead time WhatsApp Willem

Orders are placed by email with a purchase order. We supply businesses only.

Specifications

Specifications
Supply	12 and 24 V DC, operating range 11 to 30 V DC
Input	LIN bus; value from a message with adjustable ID
Output	0-10 V and PWM, simultaneously
Isolation	Not galvanically isolated
Setup	OLED display with UP, DOWN and OK buttons
Communication	Message ID, position of the value and scaling adjustable on the display
USB	USB-C for software updates and reading the status
Wi-Fi	Built-in hotspot for software updates
Mounting	DIN rail, horizontal enclosure
Internally fitted with	PR181T25

Printable datasheet

Setup

Connect the supply, the LIN bus and the outputs according to the wiring diagram supplied with the module.
On the display, set the message ID and the position of the value in the message.
Set the scaling of the 0-10 V and the PWM output and store with SAVE.

Application

Reading a sensor or component with a LIN bus with a PLC with an analogue input
Using vehicle components with LIN in a machine or test setup
Passing a LIN value on to a PWM-controlled device

PR515 series: controllers and converters with OLED display

The modules in the PR515 series have an OLED display and push buttons, so they can be set up without a computer and show the current values of inputs and outputs. They run on 12 and 24 V DC systems. Most versions can be extended on request, for example with an extra relay output, a PWM output, a bus connection (CAN bus or Modbus) or a different sensor input.

More about the PR515 series