PR515 module in DIN rail enclosure, angled top view: OLED display, push buttons, USB-C port and screw terminals

PT100 to 4-20 mA and 0-10 V, with OLED display and alarm relay

Article number PR515x500

The PR515x500 measures the temperature with a PT100 sensor in a 2-, 3- or 4-wire connection and passes it on as 4-20 mA and as 0-10 V. Which temperature corresponds to 4 mA and which to 20 mA is set on the OLED display. In addition, a relay contact switches at an adjustable limit, with hysteresis, so the same module can also drive an alarm or a fan. This lets you connect an existing PT100 to a PLC or controller that only has a 4-20 mA or 0-10 V input.

Supply 12 and 24 V DC, operating range 11 to 30 V DC
Input PT100, 2-, 3- or 4-wire
Output 4-20 mA (active) and 0-10 V, simultaneously; relay contact (normally open)

Price on request

Supplied in series, from 10 units per item. Not in stock? Then we build your series.

One or a few units only as a trial, for a company with a series in sight.

Request price and lead time WhatsApp Willem

Orders are placed by email with a purchase order. We supply businesses only.

Specifications

Specifications
Supply	12 and 24 V DC, operating range 11 to 30 V DC
Input	PT100, 2-, 3- or 4-wire
Measuring range	Adjustable, for example −50 to +150 °C
Output	4-20 mA (active) and 0-10 V, simultaneously; relay contact (normally open)
Isolation	Not galvanically isolated; isolated version as an option
Setup	OLED display with UP, DOWN and OK buttons
USB	USB-C for software updates and reading the status
Wi-Fi	Built-in hotspot for software updates
Mounting	DIN rail, horizontal enclosure
Internally fitted with	PR181T23

Printable datasheet

Setup

Connect the supply, the PT100 and the outputs according to the wiring diagram supplied with the module.
On the display, choose the temperature at 4 mA and at 20 mA (and with it at 0 and 10 V).
Set the relay limit and hysteresis and store with SAVE.

Application

Connecting an existing PT100 sensor to a PLC with a 4-20 mA or 0-10 V input
Passing coolant, oil or engine temperature on to a control or alarm system
Switching a fan or alarm above a set temperature, without a separate thermostat

PR515 series: controllers and converters with OLED display

The modules in the PR515 series have an OLED display and push buttons, so they can be set up without a computer and show the current values of inputs and outputs. They run on 12 and 24 V DC systems. Most versions can be extended on request, for example with an extra relay output, a PWM output, a bus connection (CAN bus or Modbus) or a different sensor input.

More about the PR515 series