W181 module in compact DIN rail enclosure, front three-quarter view: OLED display, three push buttons, DIP switch, USB-C port and screw terminals

Smart meter (P1 port) read out via Wi-Fi, with OLED display

Article number W181A-P505

The W181A-P505 is connected with an RJ12 cable to the P1 port of a smart meter (DSMR 2.2 up to and including 5). The module reads every telegram, shows the current values on the OLED display and sends them via Wi-Fi using MQTT to a server of your choice. The module takes its power from its own 24 V connection and therefore does not load the meter; this also makes it work on meters without power on the P1 port.

  • Supply 24 V DC (±15 %)
  • Input smart meter P1 port (DSMR 2.2 to 5), RJ12 or screw terminals
  • Output wi-Fi with MQTT to a server of your choice

Price on request

Supplied in series, from 10 units per item. Not in stock? Then we build your series.

One or a few units only as a trial, for a company with a series in sight.

Orders are placed by email with a purchase order. We supply businesses only.

Specifications

Specifications
Supply24 V DC (±15 %)
InputSmart meter P1 port (DSMR 2.2 to 5), RJ12 or screw terminals
OutputWi-Fi with MQTT to a server of your choice
IsolationIsolation is in the meter (optocoupler)
SetupOLED display with UP, DOWN and OK buttons; DIP switch for basic choices
P1 portData Request switched, high-impedance at start-up; meter power not used; ESD protection on data and request
USBUSB-C for software updates and reading the status
Wi-FiBuilt-in hotspot for software updates
MountingDIN rail, compact enclosure

Connections

Connections
TerminalFunction
Terminal 3P1 data
Terminal 4P1 data GND
Terminal 5P1 data request

Printable datasheet

Setup

  1. Connect the supply and link the meter's P1 port with a straight RJ12 cable or via the terminals.
  2. Switch on the Wi-Fi hotspot on the display and enter your Wi-Fi network and the MQTT server details.
  3. Check on the display that telegrams are arriving.

Application

  • Consumption and feed-in of a building in a dashboard or building management system
  • Controlling a charging point or battery on the current consumption

W181 series: compact modules with OLED display and Wi-Fi

The modules in the W181 series are compact and fit on a DIN rail. They have an OLED display and push buttons, so they can be set up without a computer and show the current values. A DIP switch on the board fixes basic choices. Software updates are loaded through the USB-C port and a built-in Wi-Fi hotspot. The modules run on 24 V DC. Extensions are possible on request, such as an extra relay output, a different sensor input or a bus connection.

More about the W181 series

Not quite right?

A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.

Question about wiring?

You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.

W181A-P505

Request price and lead time

Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.

The fastest way

Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.

Request

Fields marked * are required.

You can also send photos or drawings via WhatsApp(opens in a new tab).

Request price