W181 module in compact DIN rail enclosure, front three-quarter view: OLED display, three push buttons, DIP switch, USB-C port and screw terminals

Two resistance inputs (tank sender) read out via Wi-Fi, with OLED display

Article number W181A-P506

The W181A-P506 measures two resistances without range switching, from 0-200 Ω (tank senders) up to 100 kΩ. The measurement is ratiometric against a 0.1 % reference resistor with a 16-bit ADC; the measuring current is only on while measuring. The values are shown on the OLED display and are sent via Wi-Fi using MQTT to a server of your choice.

  • Supply 24 V DC (±15 %)
  • Input two resistance inputs, 0 Ω to 100 kΩ
  • Output wi-Fi with MQTT to a server of your choice

Price on request

Supplied in series, from 10 units per item. Not in stock? Then we build your series.

One or a few units only as a trial, for a company with a series in sight.

Orders are placed by email with a purchase order. We supply businesses only.

Specifications

Specifications
Supply24 V DC (±15 %)
InputTwo resistance inputs, 0 Ω to 100 kΩ
OutputWi-Fi with MQTT to a server of your choice
IsolationNot galvanically isolated; senders connected to the module's 0 V
SetupOLED display with UP, DOWN and OK buttons; DIP switch for basic choices
AccuracyApprox. 0.15 % at 0-200 Ω and 0-500 Ω; resolution approx. 0.02 Ω at 0-200 Ω
USBUSB-C for software updates and reading the status
Wi-FiBuilt-in hotspot for software updates
MountingDIN rail, compact enclosure

Connections

Connections
TerminalFunction
Terminal 3Resistance 1
Terminal 40 V (common)
Terminal 5Resistance 2

Printable datasheet

Setup

  1. Connect the supply and the two senders according to the wiring diagram supplied with the module.
  2. Set the resistance at empty and full and the unit per channel on the display.
  3. Switch on the Wi-Fi hotspot on the display and enter your Wi-Fi network and the MQTT server details.

Application

  • Reading tank level (water, diesel, waste water) with existing tank senders
  • Monitoring a resistance sensor or potentiometer position remotely

W181 series: compact modules with OLED display and Wi-Fi

The modules in the W181 series are compact and fit on a DIN rail. They have an OLED display and push buttons, so they can be set up without a computer and show the current values. A DIP switch on the board fixes basic choices. Software updates are loaded through the USB-C port and a built-in Wi-Fi hotspot. The modules run on 24 V DC. Extensions are possible on request, such as an extra relay output, a different sensor input or a bus connection.

More about the W181 series

Not quite right?

A different input, another range, galvanic isolation or your own logo: we adapt the module for your series.

Question about wiring?

You speak directly with the developer. Call or message Willem on +31 6 45 77 55 93.

W181A-P506

Request price and lead time

Enter the quantity per delivery and per year. You will receive price and lead time by email. You then order with a purchase order.

The fastest way

Send the article number, the quantity per delivery and the quantity per year via WhatsApp to +31 6 83 66 55 88. Willem replies on working days.

Request

Fields marked * are required.

You can also send photos or drawings via WhatsApp(opens in a new tab).

Request price