PR515 module in horizontal DIN rail enclosure, front view with pluggable screw terminals

Joystick with centre position to 0-10 V, with dead band, with OLED display

Article number PR515x553

The PR515x553 reads a joystick or potentiometer with a centre position and provides a 0-10 V signal: centre gives 5 V, the extremes 0 and 10 V. Around the centre you set a dead band, so small deviations of a joystick at rest cause no movement. Centre, extremes and dead band are taught to the module on the OLED display, with the joystick in the relevant position.

Supply 12 and 24 V DC, operating range 11 to 30 V DC
Input joystick or potentiometer with centre position
Output 0-10 V; centre position 5 V

Price on request

Supplied in series, from 10 units per item. Not in stock? Then we build your series.

One or a few units only as a trial, for a company with a series in sight.

Request price and lead time WhatsApp Willem

Orders are placed by email with a purchase order. We supply businesses only.

Specifications

Specifications
Supply	12 and 24 V DC, operating range 11 to 30 V DC
Input	Joystick or potentiometer with centre position
Output	0-10 V; centre position 5 V
Isolation	Not galvanically isolated
Setup	OLED display with UP, DOWN and OK buttons
Control	Centre, extremes and dead band taught on the display
USB	USB-C for software updates and reading the status
Wi-Fi	Built-in hotspot for software updates
Mounting	DIN rail, horizontal enclosure

Printable datasheet

Setup

Connect the supply, the joystick and the output according to the wiring diagram supplied with the module.
Put the joystick in the centre position and in both extremes and teach each position on the display.
Set the dead band around the centre and store with SAVE.

Application

Coupling a joystick to a valve driver or controller with a 0-10 V input
Preventing creep of a machine with a dead band around the centre position
Readjusting a worn joystick without replacing it

PR515 series: controllers and converters with OLED display

The modules in the PR515 series have an OLED display and push buttons, so they can be set up without a computer and show the current values of inputs and outputs. They run on 12 and 24 V DC systems. Most versions can be extended on request, for example with an extra relay output, a PWM output, a bus connection (CAN bus or Modbus) or a different sensor input.

More about the PR515 series